water-heater-insulation_20100126161002





There are some easy home insulation fixes which you could do it yourself (DIY). For example, wrapping an insulation cover around ductwork, hot-water pipes and hot-water heaters are some of the home insulation DIY you can easily handle. These DIY insulation fixes are the easiest to handle and getting it done makes a big difference in your utility bill. Other than helping to reduce your energy cost, these DIY home insulations make the devices (such as hot-water heater) or the heating system last much longer since they do not have to work harder to keep the heat.

Ductwork Insulation
First, check the joints in your ductwork. You can seal any that leak air by wrapping them with an overlapping layer of metal-backed or duct tape (duct tape can’t handle very high temperatures, so it shouldn’t be used around chimneys or flues).

If ductwork from a forced-air heating or cooling system travels through an unheated (or uncooled) space, insulate the ducts. Wrap the ducts with batts of foil-backed fiberglass insulation or foil “sleeves” available at home centers (put affiliate here). Tape the ends of the batts together with duct tape (if you scrape a little insulation off the foil backing, this provides a “lip” that can be wrapped over the neighboring batt to make taping easier).

Fiberglass insulation can irritate eyes, lungs and skin, so take precautions when handling it. Wear gloves, a hood, long sleeves, and long trousers (coveralls work well), and use a respirator mask and safety goggles.

Hot-Water Pipes Insulation
Hot-water pipes that run through unheated areas of the house and are vulnerable to freezing should be insulated. Hot-water pipes can also be insulated as far as possible after it leaves the hot-water tank, even in heated areas. This helps the hot water inside the pipe to retain its heat for longer, and thus reduces the time it takes for hot water to reach your faucets. The easiest insulation to use is the sleeve or tube-style that has a slit running down its length.

The advice for you to work on it is to wait for the hot-water pipes to cool down long enough to be safe. Cut the insulation tube to fit the pipe length as required, and slip it over the pipe (measure your pipe diameter before buying the insulation to make sure you choose the right size). If the slit has self-adhesive backing, remove the tape and seal it. Seams can be duct-taped together.

Hot-water Heaters Insulation
You can buy insulation kits to fit your hot-water tank. Just wrap the insulation around the heater as directed in the instruction. Be careful, however, as there are some areas that insulation shouldn’t cover, such as the top of the tank, temperature control, and drain and pressure-relief valves. For gas heaters, keep the burner inlet, pilot access plate and daft hood clear. For oil heaters, keep the peep sight, flue pipe and oil burner mechanism clear. Lastly, for electric heaters, keep the power connection and element access panels clear.

Roofs Insulation
Heat can build up in the attic for dark covering roof. As a result, the air-conditioning system will be strained due to the heat built up. What you can do is try a heat barrier, which consists of foam sheets with an aluminum layer that blocks the heat. You can staple the sheets to the underside of the roof (aluminum side against the roof).

In conclusion, these are some of the home insulation DIY that are easily done over the weekend. The effort spent on fixing these DIY home insulation are well worth as the benefits to home insulation is an energy efficient home (link. In view of the escalating cost of fossil fuel, home insulation is more important than ever. Home insulation can essentially lower your utility bills by making your home “weather proof” as well as giving huge environmental benefits.

Related Home Insulation Guide